Shadetree Fabrications- Scoots Page

Bad Penny

Put this shovel together for my good friend Andre!

Nickel frame, 93 inch high compression compression shovel, HD 5 speed.

This bike launched our new simpleton product line. check out all the brass bits on our bolt-on crap page.

Call to order yours today

Project Night Train

We finally finished our night train project!

Now you can bring the same great looks to your night train that we have been doing on the crossbones. This is a 2007.

We are also doing a quick fuel pump kit that enables you to put any tank you want on your fuel injected bike! We have a switch plate set up that uses you stock key switch this eliminates your speedo!

Everything on this bike we sell so if you dig it call us for details!

Call to order yours today

Capn Mac's Bones II

After the first cross bones we built for Ken got burned to the ground by some jealous chump. He called me and gave me the go ahead to do what I want!

So I put in a call to Baker Drivetrain for their new 6 speed kicker kit forthe twin cam. This is the only one that exist on the road right now.

In forties fashion we bent up some hollywood bars added some antique patina paint and fabbed some one off fish tail exhausts.

Finished it off with our hand cast air cleaner, grips, and foot boards in yellow brass. Found in our Bolt on Shit Section

Call to order yours today

Jeffs Bones

Put this Cross bone together for my buddy Jeff. He saw the the original Crossbones we did. He thought he wanted one like Kens that was burned up by the jealous chump. Then he saw Kens new one and we had to rethink it. He dropped the bike off went to his hotel and after a few crown and cokes we decided on flat black, tall bars, and flappers.

Finished it off with our hand cast air cleaner, grips, and re-did the seat with the STF logo all found in our Bolt on Shit Section

Call to order yours today

The Morrison

Just finished this lil number for my bro Mike!

He wanted something like the lumberjack and I told him I would come close. hanged up the wheels to a 5 spoke. New S&S 93 inch shovel. Harley polished 5 speed.

This bike emulates the lumberjack in that to me it is the quintessential chopper. Not to much, but enough to get you a spot in front of the bar!

Blackwood Special

Our new bike is called the Blackwood Special. We are building a limited production of twenty units. They will retail for $19,995 US. Comes with the ultra reliable 80 inch Evolution motor, and a six speed trick shift trans. You can choose frome five different wood inlays in tank, and footboards. Comes in any color you choose, as long as it is black or satin black. Hand or Foot shift depending how cool you want to be. Want to stand out from the crowd? Be different but in a cool way? Atract supermodels? The offical debut is at Myrtle beach Bike Week, so get em while supplies last..

Shadetree Fabrications Built the "Legends Ride Charity" bike for Sturgis 2009.

I am donating my time and some parts! Kustomwerks donated the frame, frontend, and wheels! Baker Drivetrain is helping us out with the 5 speed kicker, synchronous belt drive, and Firestarter! S&S Is working to get us a motor as I write this! Jaybrake hooked me up with all the braking and controls! And of course, Woody and the crew at the Chip Are doing everything they can so I can make My deadline! American Iron will be featuring the bike in the August issue which comes out some time in July.

Rock Star

I built this bike for my buddy Mike Chick. He ordered the frame kit from Redneck and sent it down to my shop. Basically, it was a shop droppings type of bike. 88 inch S&S came from an '03 Indian Chief along with the transmission. The wheels were Ironhorse take off and the front end was a Big Dog cut off Chopper.I built the tank, the bars, pipes and fender in about a week and satin powder coated the front and wheels.

I ended up riding this bike alot and it was definately one of my favorites. No nonsense, just a raw, rideble motorcycle.

Hussey Hauler

By far one of my favorite motorcycles. I built this bike for my friend Harris Polakoff. He wanted a Bobzilla style hard core chop. He basically brought me a complete bike and I stripped it down and replaced everything but the frame, transmission and rear wheel. The gas tank, oil tank, fender a bars are scratch built. The exhaust pays omage to my good friend Fast Eddie. Who is one of my little known heros in the industry. The twist clutch and inernal throttle are streamed lined. The air cleaner is a vent cover from a boat and the tail light is a 50's style microphone.

I put alot of miles on this bike and I think that grirder is one of the best riding front ends I have ever run. The air cleaner and tail light will go into production soon.

Lil Black Lumberjack

(aka, lil wood chopper)I finally got to build a bike for myself! This 84 shovel epitomizes what I think a chopper should be! It is a little flashy for my taste but I built it for the easyrider show and they gotta have a little bit of shiny stuff!

Everything on this bike is hand made. The wood is purple heart and is inlaid in the tank, grips,boards, and wheels! the wheels are my proprietary design and the wood was actually cnc'd by my buddy! This is the first dual block twist clutch I've done and it works smooth.

Voodoo Queen

Built this little jewel for my friend Steve who passed away before he even heard it run. He did get a chance to go to boulder and have Lichter shoot it for easyrider. The frame is an original 54'. I built the tank, fender, oil tank, and exhaust from scratch! The inlays are padouk!
There are alot of unique little pieces on this shiny lil scoot like the solid brass flappers, original 50th anniversary emblems inlaid into the tank, dual linkert carbs, 20's headlight, and 50's fender cap for the taillights.

This is one of those bikes you have to look at more than once to see everything!

Blackwood Racer

The Blackwood is built around a 1948 V-Twin replica kit. This was the first bike I used wood on. The frame, drive train, front end and wheels and basically all the workings of the bike are replica units. I restyled it with sheet metal and some brass accents. The tank and foot board inserts are maple.

This bike is slated to be featured in Easyrider. Look for it in upcoming issues.

It was also featured in Wild Magazine.

The oil tank is now in production and avilable!

Visit the Bolt on Crap section to get yours!